Fluke Power Quality and Energy Analyzer

This energy monetization capability allows you to identify the most energy-wasteful areas of your facility so you can determine potential energy saving solutions. Add basic power quality measurements to the package and you’re got yourself one powerful troubleshooting tool.

Applications

  • Energy monetization – calculate the fiscal cost of energy waste due to poor power quality
  • Energy assessment – quantify the before and after installation improvements in energy consumption to justify energy saving devices
  • Frontline troubleshooting – quickly diagnose problems on-screen to get your operation back online
  • Predictive maintenance – detect and prevent power quality issues before they cause downtime
  • Long-term analysis – uncover hard-to-find or intermittent issues
  • Load studies – verify electrical system capacity before adding loads

CSA cat3-1000/cat4-600 certified

Description

Product specifications    
 ModelMeasurement rangeResolutionAccuracy
Volt
Vrms (ac+dc)434-II1 V to 1000 V phase to neutral0.1 V± 0.5% of nominal voltage**** 
Vpk1 Vpk to 1400 Vpk1 V5% of nominal voltage
Voltage Crest Factor (CF)1.0 > 2.80.01± 5 %
Vrms½434-II1 V to 1000 V phase to neutral0.1 V± 1% of nominal voltage 
Vfund434-II1 V to 1000 V phase to neutral0.1 V± 0.5% of nominal voltage
Amps (accuracy excluding clamp accuracy)
Amps (ac +dc)i430-Flex 1x 5 A to 6000 A1:00 AM± 0.5% ± 5 counts
i430-Flex 10x0.5 A to 600 A0.1 A± 0.5% ± 5 counts
1mV/A 1x5 A to 2000 A1A± 0.5% ± 5 counts
1mV/A 10x0.5 A A to 200 A (ac only)0.1 A± 0.5% ± 5 counts
Apki430-Flex 8400 Apk 1 Arms± 5 %
1mV/A5500 Apk1 Arms± 5 %
A Crest Factor (CF)1 to 100.01± 5 %
Amps½i430-Flex 1x 5 A to 6000 A 1 A ± 1% ± 10 counts 
i430-Flex 10x0.5 A to 600 A0.1 A ± 1% ± 10 counts
1mV/A 1x  5 A to 2000 A 1A ± 1% ± 10 counts
1mV/A 10x0.5 A A to 200 A (ac only)0.1 A± 1% ± 10 counts
Afundi430-Flex 1x 5 A to 6000 A1:00 AM± 0.5% ± 5 counts 
i430-Flex 10x 0.5 A to 600 A0.1 A± 0.5% ± 5 counts
1mV/A 1x 5 A to 2000 A1A± 0.5% ± 5 counts
1mV/A 10x 0.5 A A to 200 A (ac only)0.1 A± 0.5% ± 5 counts
Hz
HzFluke 434 @ 50 Hz nominal 42.50 Hz to 57.50 Hz0.01 Hz± 0.01 Hz
Fluke 434 @ 60 Hz nominal51.00 Hz to 69.00 Hz0.01 Hz± 0.01 Hz
Power
Watts (VA, var) i430-Flex max 6000 MW0.1 W to 1 MW± 1% ± 10 counts
1 mV/Amax 2000 MW0.1 W to 1 MW± 1% ± 10 counts
Power factor (Cos j/DPF)0 to 10.001± 0.1% @ nominal load conditions
Energy
kWh (kVAh, kvarh) i430-Flex 10xDepends on clamp scaling and V nominal± 1% ± 10 counts
Energy lossi430-Flex 10xDepends on clamp scaling and V nominal± 1% ± 10 counts Excluding line resistance accuracy
Harmonics
Harmonic order (n)DC, 1 to 50 Grouping: Harmonic groups according to IEC 61000-4-7
Inter-harmonic order (n)OFF, 1 to 50 Grouping: Harmonic and Interharmonic subgroups according to IEC 61000-4-7
Volts%f0.0 % to 100 %0.10%± 0.1% ± n x 0.1 %
%r0.0 % to 100 %0.10%± 0.1% ± n x 0.4 %
Absolute0.0 to 1000 V0.1 V± 5% *
THD0.0 % to 100 %0.10%± 2.5 %
Amps%f0.0 % to 100 %0.10%± 0.1% ± n x 0.1%
%r0.0 % to 100 %0.10%± 0.1% ± n x 0.4 %
Absolute0.0 to 600 A0.1 A± 5% ± 5 counts
THD0.0 % to 100 %0.10%± 2.5 %
Watts%f or %r 0.0 % to 100 %0.10%± n x 2%
AbsoluteDepends on clamp scaling and V nominal —± 5% ± n x 2 % ± 10 counts
THD0.0 % to 100 %  0.10%± 5 %
Phase Angle-360° to +0°± n x 1°
Flicker
Plt, Pst, Pst(1min) Pinst0.00 to 20.000.01± 5 %
Unbalance
Volts%0.0 % to 20.0 %0.10%± 0.1 %
Amps%0.0 % to 20.0 %0.10%± 1 %
Mains signaling
Threshold levelsThreshold, limits and signaling duration is programable for two signaling frequencies——
Signaling frequency60 Hz to 3000 Hz0.1 Hz
Relative V%0 % to 100 %0.10%± 0.4 %
Absolute V3s (3 second avg.)0.0 V to 1000 V0.1 V± 5 % of nominal voltage
General specifications
CaseDesign Rugged, shock proof with integrated protective holster Drip and dust proof IP51 according to IEC60529 when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3 g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2
DisplayBrightness: 200 cd/m 2 typ. using power adapter, 90 cd/m 2 typical using battery power Size: 127 mm x 88 mm (153 mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness: user-adjustable, temperature compensated
Memory8GB SD card (SDHC compliant, FAT32 formatted) standard, upto 32GB optionally Screen save and multiple data memories for storing data including recordings (dependent on memory size)
Real-time clockTime and date stamp for Trend mode, Transient display, System Monitor and event capture
Environmental
Operating temperature0 °C ~ +40 °C; +40 °C ~ +50 °C excl. battery
Storage temperature-20 °C ~ +60 °C
Humidity+10 °C ~ +30 °C: 95% RH non-condensing
+30 °C ~ +40 °C: 75% RH non-condensing
+40 °C ~ +50 °C: 45% RH non-condensing
Maximum operating altitudeUp to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Maximum storage altitude 12 km (40,000 ft)
Electro-Magnetic-Compatibility (EMC)EN 61326 (2005-12) for emission and immunity
Interfacesmini-USB-B, Isolated USB port for PC connectivity SD card slot accessible behind instrument battery
Model NameDescription
Fluke 434 IIThree-Phase Energy Analyzer
Included accessories
BC430 Power Adapter
International plug adapter set
BP290 (Single capacity Li-ion battery) 28 Wh (8 hours or more)
TLS430 Test lead and Alligator clip set
WC100 color coding clips and regional decals
i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
8 GB SD card
PowerLog on CD (includes operator manuals in PDF format)
USB cable A - Mini B
C1740 Soft Case
Cables and Hardware
GPS430GPS430 Time Synchronization Module
Clips
AC285AC285 SureGrip™ Alligator Clip Set
Batteries, Chargers and Adapters
BP2902400 mAh Li-ion battery for Fluke 190 Series II
BP2914800 mAh High capacity Li-ion battery ) for Fluke 190-seriesII
BC430BC430 Line Voltage Adapter/Battery Charger
EBC290EBC290 External Battery Charger, charges BP291 while outside instrument
Current clamps
90i-610s90i-610s AC/DC Current Probe (600 A)
i30sFluke i30s AC/DC Current Clamp
i400si400s AC Current Clamp
i5sPQ3i5sPQ3, 5 A ac Current Clamps, 3-pack
i1000si1000s AC Current Clamp (1000 A)
i3000si3000s AC Current Clamp
Options
HH290Hanging Hook for ScopeMeter 190-Series II
Test Leads
TLS430TLS430 Test Leads and Alligator Clips set
WC100WC100 Color Localization Set

Reviews

There are no reviews yet.

Be the first to review “Fluke Power Quality and Energy Analyzer”

Call us